Liquid Sorbitol Sorbitol Solution Sorbitol Syrup Sugar Alcohol Sweetener Humectant for Candy Beverage Bakery Cosmetics

Product Introduction

Sorbitol Solution 70% — the pumpable way to formulate with sorbitol.

Sorbitol Solution 70% is a clear, colourless, syrupy polyol (sugar alcohol) supplied at a minimum 70% dry substance. Because it arrives as a liquid, it can be pumped, metered and blended directly into your process — no dissolving step, no dust, no bag handling and no loss of material on the plant floor.

Sorbitol is a bulk sweetener with roughly 60% of the sweetness of sucrose and about one-third fewer calories, and it contributes a smooth mouthfeel with a sweet, cool and pleasant taste. In liquid form those same functional properties are available in a handling format designed for continuous production lines rather than batch-by-hand dosing.

Each lot is produced against a fixed specification and released against a Certificate of Analysis before it leaves the plant.

Why Buyers Choose This Grade

Liquid economics, not powder logistics. At 70% dry substance the product is already in solution. You pay for sorbitol, not for the water you would otherwise add on site, and you remove a whole processing step from the line.

A narrow, repeatable specification. The full parameter set — dry substance, refractive index, specific gravity, optical rotation, reducing sugars, total sugars, mannitol, ash, chlorides, sulphates, heavy metals, arsenic, nickel and iron — is fixed in writing, so your formulation behaves the same way lot after lot.

Low mannitol, low reducing sugars. Mannitol is held to ≤ 1.5% and reducing sugars to ≤ 0.03%, keeping the product clean for sensitive formulations.

Low ionic load. Resistivity is controlled at ≤ 20 µS/cm, which matters when the sorbitol is going into a system where dissolved ions are not welcome.

Documented and traceable. A Certificate of Analysis is issued per batch, and the product's regulatory standing is well established.

Key Benefits

• Ready-to-use 70% solution: pumpable, meterable, blendable
• No dusting, no dissolution time, no powder handling losses
• Sweetness ≈ 60% of sucrose with roughly one-third fewer calories
• Smooth mouthfeel; sweet, cool and pleasant taste profile
• Humectant and bulking functionality for formulation body and moisture management
• Tight mannitol and reducing-sugar limits for demanding recipes
• Consistent batch-to-batch specification, verified by COA
• Food-additive status (INS/E 420) recognised across major markets

Specification

Quality & Compliance

Food-additive identity:

• INS No. 420; CAS 50-70-4.

Regulatory recognition:

• sorbitol has been affirmed as GRAS (Generally Recognized As Safe) by the U.S. Food Administration and is approved for use by the European Union and numerous countries around the world, including Australia, Canada and Japan.

Track record:

• sorbitol has been safely used in processed foods for almost half a century.

Release documentation:

• Certificate of Analysis issued per batch; the specification table in Section 5 is the release basis.

Further documents:

• additional technical documents are available on request before order confirmation.

Applications

Application suitability always depends on your local regulatory framework and on your finished-product formulation. Tell us the target application and we will confirm the matching grade.

Packaging & Supply

Drum sizes and materials can be mixed to suit your unloading and storage setup.

Storage & Handling

• Store in a cool, dry, ventilated environment.
• Keep containers closed and use clean, dedicated transfer equipment.
• The product is a liquid at ambient conditions and is supplied ready to pump.
• Rotate stock on a first-in, first-out basis; refer to the batch COA for the lot's manufacture and expiry dates.

FAQ

Q1. Why choose the 70% solution instead of sorbitol powder? You skip dissolving, dust control and powder handling entirely. The 70% solution is pumped or metered straight into your process at a fixed dry-substance level.

Q2. How sweet is it? Sorbitol is about 60% as sweet as sucrose, with roughly one-third fewer calories, and delivers a smooth mouthfeel with a sweet, cool and pleasant taste.

Q3. What is the purity of the sorbitol itself? D-Sorbitol is specified at ≥ 68.0%, with mannitol ≤ 1.5% and reducing sugars ≤ 0.03%.

Q4. What documentation comes with a shipment? A Certificate of Analysis is issued for each batch against the specification in Section 5.

Q5. How should it be stored, and how long does it keep? Store in a cool, dry, ventilated environment. Shelf life is 24 months under proper storage; check the batch COA for the specific lot's dates.

Q6. What packaging can I order? 250 kg, 270 kg or 275 kg drums in new plastic or steel, plus IBC drum and flexible bag options.

• Factory-direct supply with stable quality and batch-to-batch consistency
• Full documentation package: Specification, COA, MSDS
• Flexible viscosity grades and packing options tailored to your mortar formulation
• Experienced export service with fast response

Qingdao Golden Grain Chemical Co., Ltd, invested by Golden Grain Group Limited, one professional manufacturer and exporter since 2000, is devoted to supplying products and solutions to food & beverage, medicine, animal feed & nutrition, personal care & household, construction, agriculture.
Golden Grain Group Limited have professional staff, advanced production lines and complete lab equipment, pass GMP, HACCP, ISO, HALAL, KOSHER, BRC, GMP-Free, and other necessary certificates, which ensure our quality to be international standard. For many years' experience, we are exporting our products to more than 60 countries in the world.
"Quality Products", "Efficient Service", Golden Grain Group Limited hope to enter good business cooperation with customers at home and abroad for long.